Airspy R2

€199.00
Tax included

Airspy R2 sets a new level of performance in the reception of the VHF and UHF bands thanks to its low-IF architecture based on Rafael Micro R820T2 R860 and a high quality Oversampling 12bit ADC and state of the art DSP.

In Oversampling Mode, the Airspy R2 applies Analog RF and IF filtering to the signal path and increases the resolution to up to 16-bit using the software decimation. The net result is Spectacular Performance!

The coverage can be extended to the HF bands via the SpyVerter up-converter companion.

The Airspy R2, like its predecessor is 100% compatible with all the existing software including the de facto scanning standard SDR#, but also a number of popular software defined radio applications such as SDR-Radio, HDSDR, GQRX and GNU Radio.

Quantity

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)
  • Continuous 24 – 1700 MHz native RX range, down to DC with the SpyVerter option
  • 3.5 dB NF between 42 and 1002 MHz
  • Maximum RF input of +10 dBm
  • Tracking RF filters
  • 35dBm IIP3 RF front end
  • 12bit ADC @ 20 MSPS (10.4 ENOB, 70dB SNR, 95dB SFDR)
  • 10MSPS IQ output
  • Experimental 2.5MSPS IQ output for low power devices (Raspberry Pi, Odroid, etc.) – Not recommended for high performance applications.
  • Up to 80 MSPS when using custom firmware
  • Cortex M4F @ up to 204MHz with Multi Core support (dual M0)
  • 0.5 ppm high precision, low phase noise clock
  • 1 RTC clock (for packet time-stamping)
  • External clock input (10 MHz to 100 MHz via MCX connector) – Ideal for phase coherent radios
  • 10 MHz panoramic spectrum view with up to 9MHz alias/image free
  • IQ or Real, 16bit fixed or 32bit float output streams
  • No IQ imbalance, DC offset or 1/F noise at the center of the spectrum that plagues all the other SDRs
  • Extension ports: 16 x SGPIO
  • 1 x RF Input (SMA connector, up to 30kV ESD protection)
  • 1 x RF Output (Loopthrough, U-FL, 15kV ESD protection)
  • 2 x High Speed ADC inputs (up to 80 MSPS, U-FL, DC coupled, 15kV ESD protection)
  • 4.5v software switched Bias-Tee to power LNA’s and up/down-converters
  • 8 x programmable high speed gpio’s up to 100MHz
  • 3 x programmable synchronized clock outputs up to 160MHz
  • 1 x core CPU clock output
  • 1 x reset pin
  • 2 x regulated +5.0 and +3.3v pins
  • 1 x JTAG header
  • No drivers required! 100% Plug-and-play on Windows Vista, Seven, 8, 8.1 and 10
  • Operating temperature: -10°C to 40°C
3000 Items